User Tools

Site Tools


manual:demos:evbplus_dragon12p_codewarrior

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
manual:demos:evbplus_dragon12p_codewarrior [2015/05/22 18:05]
127.0.0.1 external edit
manual:demos:evbplus_dragon12p_codewarrior [2019/09/24 22:12] (current)
Line 13: Line 13:
 To program the bootloader into the internal flash on the HCS12DG256 microcontroller,​ the [[http://​www.pemicro.com/​products/​product_viewDetails.cfm?​product_id=33| P&E Micro USB BDM Multilink]] interface was used. However, this is not required if you have another means of programming the internal flash. To program the bootloader into the internal flash on the HCS12DG256 microcontroller,​ the [[http://​www.pemicro.com/​products/​product_viewDetails.cfm?​product_id=33| P&E Micro USB BDM Multilink]] interface was used. However, this is not required if you have another means of programming the internal flash.
  
-To compile the demo programs you can use the [[http://www.freescale.com/webapp/sps/site/prod_summary.jsp?​code=CW-SUITE-SPECIAL&​tid=CWH|Freescale ​Codewarrior for HCS12(X)]] development environment. ​+To compile the demo programs you can use the [[https://www.nxp.com/support/developer-resources/software-development-tools/codewarrior-development-tools/​codewarrior-legacy/​codewarrior-development-suite-special:​CW-SUITE-SPECIAL|Codewarrior ​Development Studio ​for HCS12(X)]] development environment. ​
  
 ===== Building and programming the Bootloader ===== ===== Building and programming the Bootloader =====
 +
 Before the bootloader can be used, it needs to be built and programmed into the HCS12DG256'​s internal flash memory. The steps in this section only need to be done once. Before the bootloader can be used, it needs to be built and programmed into the HCS12DG256'​s internal flash memory. The steps in this section only need to be done once.
  
Line 28: Line 29:
  
 ===== Building the Demo Program ===== ===== Building the Demo Program =====
 +
 When using Freescale Codewarrior,​ simply open the project from within Codewarrior and select //​Project->​Make//​ from the menu. The project file is located at: \Target\Demo\HCS12_Evbplus_Dragon12p_CodeWarrior\**Prog**\ide\ When using Freescale Codewarrior,​ simply open the project from within Codewarrior and select //​Project->​Make//​ from the menu. The project file is located at: \Target\Demo\HCS12_Evbplus_Dragon12p_CodeWarrior\**Prog**\ide\
  
 The output file is The output file is
 +
   * \Target\Demo\HCS12_Evbplus_Dragon12p_CodeWarrior\**Prog**\bin\**demoprog_evbplus_dragon12p.abs.sx**   * \Target\Demo\HCS12_Evbplus_Dragon12p_CodeWarrior\**Prog**\bin\**demoprog_evbplus_dragon12p.abs.sx**
  
 ===== Firmware update procedure ===== ===== Firmware update procedure =====
 +
 To download the demo program \Target\Demo\HCS12_Evbplus_Dragon12p_CodeWarrior\**Prog**\bin\**demoprog_evbplus_dragon12p.abs.sx** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use: To download the demo program \Target\Demo\HCS12_Evbplus_Dragon12p_CodeWarrior\**Prog**\bin\**demoprog_evbplus_dragon12p.abs.sx** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:
  
Line 41: Line 45:
  
 ===== Resolving Build Errors ===== ===== Resolving Build Errors =====
 +
 When building the demo binaries for the first time, build errors might occur caused by CodeWarrior projects not correctly dealing with relative directories and having source-files in a project that have the same name as source-files in the library path. These errors are quickly resolved by removing the file from the project and adding them again. ​ When building the demo binaries for the first time, build errors might occur caused by CodeWarrior projects not correctly dealing with relative directories and having source-files in a project that have the same name as source-files in the library path. These errors are quickly resolved by removing the file from the project and adding them again. ​
  
manual/demos/evbplus_dragon12p_codewarrior.txt ยท Last modified: 2019/09/24 22:12 (external edit)