Differences

This shows you the differences between two versions of the page.

Link to this comparison view

manual:demos:infineon_xmc1400_boot_kit_gcc [2017/04/24 15:04]
voorburg [Building the Demo Program]
manual:demos:infineon_xmc1400_boot_kit_gcc [2019/08/14 13:12] (current)
voorburg [Development Environment]
Line 10: Line 10:
 {{:manual:demos:infineon_xmc1400_boot_kit.jpg?200 |}} {{:manual:demos:infineon_xmc1400_boot_kit.jpg?200 |}}
  
-This demo is targeted towards the [[http://www.infineon.com/cms/en/product/evaluation-boards/KIT_XMC14_BOOT_001/productType.html?productType=5546d46250cc1fdf015144a2102e1191|Infineon XMC1400 Boot Kit]] board, with 200 kB internal Flash EEPROM and 16 kB internal RAM.+This demo is targeted towards the [[https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc14_boot_001/|Infineon XMC1400 Boot Kit]] board, with 200 kB internal Flash EEPROM and 16 kB internal RAM.
  
 To program the bootloader into the internal flash on the XMC1400 microcontroller, the on-board [[http://www.segger.com/development-tools.html|Segger J-Link]] JTAG interface was used. However, this is not required if you have another means of programming the internal flash.  To program the bootloader into the internal flash on the XMC1400 microcontroller, the on-board [[http://www.segger.com/development-tools.html|Segger J-Link]] JTAG interface was used. However, this is not required if you have another means of programming the internal flash. 
manual/demos/infineon_xmc1400_boot_kit_gcc.txt · Last modified: 2019/08/14 13:12 by voorburg
 
Powered by PHP Driven by DokuWiki