Differences

This shows you the differences between two versions of the page.

Link to this comparison view

manual:demos:infineon_xmc4700_relax_kit_gcc [2019/06/13 12:09]
voorburg [Supported firmware update interfaces]
manual:demos:infineon_xmc4700_relax_kit_gcc [2019/08/14 13:10] (current)
voorburg [Development Environment]
Line 10: Line 10:
 {{:manual:demos:infineon_xmc700_relax_kit.jpg?100 |}} {{:manual:demos:infineon_xmc700_relax_kit.jpg?100 |}}
  
-This demo is targeted towards the [[http://www.infineon.com/cms/en/product/evaluation-boards/KIT_XMC47_RELAX_V1/productType.html?productType=5546d46250cc1fdf0150f6bdcddb6ec7|Infineon XMC4700 Relax Kit]] board, with 2048 kB internal Flash EEPROM and 352 kB internal RAM.+This demo is targeted towards the [[https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc47_relax_v1/|Infineon XMC4700 Relax Kit]] board, with 2048 kB internal Flash EEPROM and 352 kB internal RAM.
  
 To program the bootloader into the internal flash on the XMC4700 microcontroller, the on-board [[http://www.segger.com/development-tools.html|Segger J-Link]] JTAG interface was used. However, this is not required if you have another means of programming the internal flash.  To program the bootloader into the internal flash on the XMC4700 microcontroller, the on-board [[http://www.segger.com/development-tools.html|Segger J-Link]] JTAG interface was used. However, this is not required if you have another means of programming the internal flash. 
manual/demos/infineon_xmc4700_relax_kit_gcc.txt · Last modified: 2019/08/14 13:10 by voorburg
 
Powered by PHP Driven by DokuWiki