User Tools

Site Tools


manual:demos:nucleo_f091rc_gcc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
manual:demos:nucleo_f091rc_gcc [2017/07/19 15:16]
voorburg [Building the Demo Program]
manual:demos:nucleo_f091rc_gcc [2020/02/06 16:17] (current)
voorburg
Line 3: Line 3:
 ===== Supported firmware update interfaces ===== ===== Supported firmware update interfaces =====
  
-UART           ^ CAN             ^ USB          ^ TCP/​IP ​      ^ SD-card ​     ^+RS232          ​^ CAN             ^ USB          ^ TCP/​IP ​      ^ SD-card ​     ^
 | Yes            | Yes             | No           | No           | No           | | Yes            | Yes             | No           | No           | No           |
  
Line 85: Line 85:
 To download the demo program \Target\Demo\ARMCM0_STM32F0_Nucleo_F091RC_GCC\**Prog**\bin\**demoprog_stm32f091.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use: To download the demo program \Target\Demo\ARMCM0_STM32F0_Nucleo_F091RC_GCC\**Prog**\bin\**demoprog_stm32f091.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:
  
-  * [[manual:uart_demo|Firmware updates using the UART communication interface]]+  * [[manual:rs232_demo|Firmware updates using the RS232 communication interface]]
   * [[manual:​can_demo|Firmware updates using the CAN communication interface]]   * [[manual:​can_demo|Firmware updates using the CAN communication interface]]
  
  
manual/demos/nucleo_f091rc_gcc.1500470202.txt.gz ยท Last modified: 2019/09/24 22:13 (external edit)