manual:demos:nucleo_f103rb_gcc
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
manual:demos:nucleo_f103rb_gcc [2017/05/23 19:16] voorburg [Building and programming the Bootloader] |
manual:demos:nucleo_f103rb_gcc [2017/05/23 20:27] voorburg [Development Environment] |
||
|---|---|---|---|
| Line 12: | Line 12: | ||
| This demo is targeted towards the [[http://www.st.com/en/evaluation-tools/nucleo-f103rb.html|Nucleo-F103RB]] board, with 128 kB internal Flash EEPROM and 20 kB internal RAM. | This demo is targeted towards the [[http://www.st.com/en/evaluation-tools/nucleo-f103rb.html|Nucleo-F103RB]] board, with 128 kB internal Flash EEPROM and 20 kB internal RAM. | ||
| - | To program the bootloader into the internal flash on the on-board ST-Link debugger interface was used. Firmware updates via the serial communication port are preconfigured to use the virtual COM-port offered by the ST-Link. This means that no additional hardware is needed, besides a standard micro-USB cable. | + | To program the bootloader into the internal flash, the on-board ST-Link debugger interface was used. Firmware updates via the serial communication port are preconfigured to use the virtual COM-port offered by the ST-Link. This means that no additional hardware is needed, besides a standard micro-USB cable. |
| The demo programs are pre-configured for building with the {{:manual:arm-2013.11-24-arm-none-eabi.zip?linkonly|Codesourcery G++ Lite}} (Target OS EABI) toolchain. Alternatively, you can use the [[manual:demos:gcc_arm_embedded|GCC ARM Embedded]] toolchain. | The demo programs are pre-configured for building with the {{:manual:arm-2013.11-24-arm-none-eabi.zip?linkonly|Codesourcery G++ Lite}} (Target OS EABI) toolchain. Alternatively, you can use the [[manual:demos:gcc_arm_embedded|GCC ARM Embedded]] toolchain. | ||
| Line 39: | Line 39: | ||
| ===== Building the Demo Program ===== | ===== Building the Demo Program ===== | ||
| - | Batch files are added to aid in building the demo program. First clean the demo program by double-clicking the file "\Target\Demo\ARMCM3_STM32F1_Olimex_STM32P103_GCC\**Prog**\cmd\**clean.bat**". Next, build the demo program by double-clicking the file "\Target\Demo\ARMCM3_STM32F1_Olimex_STM32P103_GCC\**Prog**\cmd\**build.bat**". The output should look like: | + | Batch files are added to aid in building the demo program. First clean the demo program by double-clicking the file "\Target\Demo\ARMCM3_STM32F1_Nucleo_F103RB_GCC\**Prog**\cmd\**clean.bat**". Next, build the demo program by double-clicking the file "\Target\Demo\ARMCM3_STM32F1_Nucleo_F103RB_GCC\**Prog**\cmd\**build.bat**". The output should look like: |
| <code> | <code> | ||
| Line 45: | Line 45: | ||
| +++ Compiling [main.c] | +++ Compiling [main.c] | ||
| ... | ... | ||
| - | +++ Linking [demoprog_olimex_stm32p103.elf] | + | +++ Linking [demoprog_nucleo_stm32f103rb.elf] |
| ... | ... | ||
| - | +++ Build complete [demoprog_olimex_stm32p103.srec] | + | +++ Build complete [demoprog_nucleo_stm32f103rb.srec] |
| </code> | </code> | ||
| The output file is | The output file is | ||
| - | * \Target\Demo\ARMCM3_STM32F1_Olimex_STM32P103_GCC\**Prog**\bin\**demoprog_olimex_stm32p103.srec** | + | * \Target\Demo\ARMCM3_STM32F1_Nucleo_F103RB_GCC\**Prog**\bin\**demoprog_nucleo_stm32f103rb.srec** |
| ===== Firmware update procedure ===== | ===== Firmware update procedure ===== | ||
| - | To download the demo program \Target\Demo\ARMCM3_STM32F1_Olimex_STM32P103_GCC\**Prog**\bin\**demoprog_olimex_stm32p103.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use: | + | To download the demo program \Target\Demo\ARMCM3_STM32F1_Nucleo_F103RB_GCC\**Prog**\bin\**demoprog_nucleo_stm32f103rb.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use: |
| * [[manual:uart_demo|Firmware updates using the UART communication interface]] | * [[manual:uart_demo|Firmware updates using the UART communication interface]] | ||
manual/demos/nucleo_f103rb_gcc.txt ยท Last modified: 2023/12/04 22:18 by voorburg
Page Tools
