User Tools

Site Tools


manual:demos:nucleo_f303k8_iar

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
manual:demos:nucleo_f303k8_iar [2019/09/24 22:12]
127.0.0.1 external edit
manual:demos:nucleo_f303k8_iar [2023/12/04 22:24] (current)
voorburg [Supported firmware update interfaces]
Line 3: Line 3:
 ===== Supported firmware update interfaces ===== ===== Supported firmware update interfaces =====
  
-UART           ^ CAN             ​^ USB          ^ TCP/​IP ​      ​^ SD-card ​     ^ +RS232         ^ CAN            ^ USB         ​^ TCP/​IP ​     ^ SD-card ​     ​^ Modbus RTU   
-| Yes            | Yes             ​| No           ​| No           | No           |+| Yes           ​| Yes            | No          | No          ​| No           | No           |
  
 ===== Development Environment ===== ===== Development Environment =====
Line 41: Line 41:
 To download the demo program \Target\Demo\ARMCM4_STM32F3_Nucleo_F303K8_IAR\**Prog**\bin\**demoprog_stm32f303.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use: To download the demo program \Target\Demo\ARMCM4_STM32F3_Nucleo_F303K8_IAR\**Prog**\bin\**demoprog_stm32f303.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:
  
-  * [[manual:uart_demo|Firmware updates using the UART communication interface]]+  * [[manual:rs232_demo|Firmware updates using the RS232 communication interface]]
   * [[manual:​can_demo|Firmware updates using the CAN communication interface]]   * [[manual:​can_demo|Firmware updates using the CAN communication interface]]
  
manual/demos/nucleo_f303k8_iar.txt · Last modified: 2023/12/04 22:24 by voorburg