User Tools

Site Tools


manual:demos:nucleo_f303k8_truestudio

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
manual:demos:nucleo_f303k8_truestudio [2017/07/11 11:02]
voorburg created
manual:demos:nucleo_f303k8_truestudio [2019/09/24 22:12] (current)
Line 12: Line 12:
 This demo is targeted towards the [[http://​www.st.com/​content/​st_com/​en/​products/​evaluation-tools/​product-evaluation-tools/​mcu-eval-tools/​stm32-mcu-eval-tools/​stm32-mcu-nucleo/​nucleo-f303k8.html|Nucleo-F303K8]] board, with 64 kB internal Flash EEPROM and 12 kB internal RAM. This demo is targeted towards the [[http://​www.st.com/​content/​st_com/​en/​products/​evaluation-tools/​product-evaluation-tools/​mcu-eval-tools/​stm32-mcu-eval-tools/​stm32-mcu-nucleo/​nucleo-f303k8.html|Nucleo-F303K8]] board, with 64 kB internal Flash EEPROM and 12 kB internal RAM.
  
-To compile the demo programs you can use the [[https://​atollic.com/​truestudio/​|Atollic TrueStudio]] development environment. The freely available Lite-edition suffices. Note the Atollic TrueStudio is cross-platform. The information outlined on this page applies to both Microsoft Windows and Linux users.+To compile the demo programs you can use the [[https://​atollic.com/​truestudio/​|Atollic TrueStudio]] development environment. Note the Atollic TrueStudio is cross-platform. The information outlined on this page applies to both Microsoft Windows and Linux users.
  
 To program the bootloader into the internal flash, the on-board ST-Link debugger interface was used. Firmware updates via the serial communication port are preconfigured to use the virtual COM-port offered by the ST-Link. This means that no additional hardware is needed, besides a standard micro-USB cable. To program the bootloader into the internal flash, the on-board ST-Link debugger interface was used. Firmware updates via the serial communication port are preconfigured to use the virtual COM-port offered by the ST-Link. This means that no additional hardware is needed, besides a standard micro-USB cable.
manual/demos/nucleo_f303k8_truestudio.txt ยท Last modified: 2019/09/24 22:12 (external edit)