User Tools

Site Tools


manual:demos:nucleo_f746zg_gcc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
manual:demos:nucleo_f746zg_gcc [2019/09/24 22:12]
127.0.0.1 external edit
manual:demos:nucleo_f746zg_gcc [2020/02/06 16:33]
voorburg
Line 3: Line 3:
 ===== Supported firmware update interfaces ===== ===== Supported firmware update interfaces =====
  
-UART           ^ CAN             ^ USB          ^ TCP/​IP ​      ^ SD-card ​     ^ +RS232          ​^ CAN             ^ USB          ^ TCP/​IP ​      ^ SD-card ​     ^ 
-| Yes            | Yes             ​| ​No           | No           | No           |+| Yes            | Yes             ​| ​Yes          ​| No           | No           |
  
 ===== Development Environment ===== ===== Development Environment =====
Line 83: Line 83:
 To download the demo program \Target\Demo\ARMCM7_STM32F7_Nucleo_F746ZG_GCC\**Prog**\bin\**demoprog_stm32f746.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use: To download the demo program \Target\Demo\ARMCM7_STM32F7_Nucleo_F746ZG_GCC\**Prog**\bin\**demoprog_stm32f746.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:
  
-  * [[manual:uart_demo|Firmware updates using the UART communication interface]]+  * [[manual:rs232_demo|Firmware updates using the RS232 communication interface]]
   * [[manual:​can_demo|Firmware updates using the CAN communication interface]]   * [[manual:​can_demo|Firmware updates using the CAN communication interface]]
 +  * [[manual:​usb_demo|Firmware updates using the USB communication interface]]
  
manual/demos/nucleo_f746zg_gcc.txt · Last modified: 2023/12/04 22:29 by voorburg