User Tools

Site Tools


manual:demos:nucleo_f746zg_truestudio

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
manual:demos:nucleo_f746zg_truestudio [2018/12/10 12:19]
voorburg [Building the Demo Program]
manual:demos:nucleo_f746zg_truestudio [2020/02/06 16:34] (current)
voorburg
Line 3: Line 3:
 ===== Supported firmware update interfaces ===== ===== Supported firmware update interfaces =====
  
-UART           ^ CAN             ^ USB          ^ TCP/​IP ​      ^ SD-card ​     ^ +RS232          ​^ CAN             ^ USB          ^ TCP/​IP ​      ^ SD-card ​     ^ 
-| Yes            | Yes             ​| ​No           | No           | No           |+| Yes            | Yes             ​| ​Yes          ​| No           | No           |
  
 ===== Development Environment ===== ===== Development Environment =====
Line 53: Line 53:
 ===== Firmware update procedure ===== ===== Firmware update procedure =====
  
-To download the demo program \Target\Demo\ARMCM4_STM32L4_Nucleo_L476RG_TrueStudio\**Prog**\Debug\**demoprog_stm32l476.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:+To download the demo program \Target\Demo\ARMCM7_STM32F7_Nucleo_F746ZG_TrueStudio\**Prog**\Debug\**demoprog_stm32f746.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:
  
-  * [[manual:uart_demo|Firmware updates using the UART communication interface]]+  * [[manual:rs232_demo|Firmware updates using the RS232 communication interface]]
   * [[manual:​can_demo|Firmware updates using the CAN communication interface]]   * [[manual:​can_demo|Firmware updates using the CAN communication interface]]
 +  * [[manual:​usb_demo|Firmware updates using the USB communication interface]]
  
manual/demos/nucleo_f746zg_truestudio.1544440775.txt.gz · Last modified: 2019/09/24 22:13 (external edit)