User Tools

Site Tools


manual:demos:nucleo_f746zg_truestudio

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
manual:demos:nucleo_f746zg_truestudio [2020/02/04 15:22]
voorburg
manual:demos:nucleo_f746zg_truestudio [2020/02/06 16:34] (current)
voorburg
Line 3: Line 3:
 ===== Supported firmware update interfaces ===== ===== Supported firmware update interfaces =====
  
-UART           ^ CAN             ^ USB          ^ TCP/​IP ​      ^ SD-card ​     ^+RS232          ​^ CAN             ^ USB          ^ TCP/​IP ​      ^ SD-card ​     ^
 | Yes            | Yes             | Yes          | No           | No           | | Yes            | Yes             | Yes          | No           | No           |
  
Line 55: Line 55:
 To download the demo program \Target\Demo\ARMCM7_STM32F7_Nucleo_F746ZG_TrueStudio\**Prog**\Debug\**demoprog_stm32f746.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use: To download the demo program \Target\Demo\ARMCM7_STM32F7_Nucleo_F746ZG_TrueStudio\**Prog**\Debug\**demoprog_stm32f746.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:
  
-  * [[manual:uart_demo|Firmware updates using the UART communication interface]]+  * [[manual:rs232_demo|Firmware updates using the RS232 communication interface]]
   * [[manual:​can_demo|Firmware updates using the CAN communication interface]]   * [[manual:​can_demo|Firmware updates using the CAN communication interface]]
   * [[manual:​usb_demo|Firmware updates using the USB communication interface]]   * [[manual:​usb_demo|Firmware updates using the USB communication interface]]
  
manual/demos/nucleo_f746zg_truestudio.1580826172.txt.gz ยท Last modified: 2020/02/04 15:22 by voorburg