User Tools

Site Tools


manual:demos:nucleo_g071rb_gcc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
manual:demos:nucleo_g071rb_gcc [2019/08/13 15:29]
voorburg [Building the Demo Program]
manual:demos:nucleo_g071rb_gcc [2020/02/06 16:36]
voorburg
Line 3: Line 3:
 ===== Supported firmware update interfaces ===== ===== Supported firmware update interfaces =====
  
-UART           ^ CAN             ^ USB          ^ TCP/​IP ​      ^ SD-card ​     ^+RS232          ​^ CAN             ^ USB          ^ TCP/​IP ​      ^ SD-card ​     ^
 | Yes            | No              | No           | No           | No           | | Yes            | No              | No           | No           | No           |
  
Line 82: Line 82:
 ===== Firmware update procedure ===== ===== Firmware update procedure =====
  
-To download the demo program \Target\Demo\ARMCM0_STM32F0_Nucleo_F091RC_GCC\**Prog**\bin\**demoprog_stm32f091.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:+To download the demo program \Target\Demo\ARMCM0_STM32G0_Nucleo_G071RB_GCC\**Prog**\bin\**demoprog_stm32g071.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use: 
 + 
 +  * [[manual:​rs232_demo|Firmware updates using the RS232 communication interface]]
  
-  * [[manual:​uart_demo|Firmware updates using the UART communication interface]] 
-  * [[manual:​can_demo|Firmware updates using the CAN communication interface]] 
  
  
manual/demos/nucleo_g071rb_gcc.txt · Last modified: 2020/02/06 16:36 by voorburg