manual:demos:nucleo_g071rb_gcc
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
manual:demos:nucleo_g071rb_gcc [2019/08/13 15:27] voorburg [Building and programming the Bootloader] |
manual:demos:nucleo_g071rb_gcc [2023/12/04 22:31] (current) voorburg [Supported firmware update interfaces] |
||
|---|---|---|---|
| Line 3: | Line 3: | ||
| ===== Supported firmware update interfaces ===== | ===== Supported firmware update interfaces ===== | ||
| - | ^ UART ^ CAN ^ USB ^ TCP/IP ^ SD-card ^ | + | ^ RS232 ^ CAN ^ USB ^ TCP/IP ^ SD-card ^ Modbus RTU ^ |
| - | | Yes | No | No | No | No | | + | | Yes | No | No | No | No | No | |
| ===== Development Environment ===== | ===== Development Environment ===== | ||
| Line 56: | Line 56: | ||
| ===== Building the Demo Program ===== | ===== Building the Demo Program ===== | ||
| - | To build the user program, open a command prompt in directory **\Target\Demo\ARMCM0_STM32F0_Nucleo_F091RC_GCC\Prog\** and run the command: | + | To build the user program, open a command prompt in directory **\Target\Demo\ARMCM0_STM32G0_Nucleo_G071RB_GCC\Prog\** and run the command: |
| <code> | <code> | ||
| Line 65: | Line 65: | ||
| <code> | <code> | ||
| - | +++ Cleaning build environment | + | +++ Cleaning build environment |
| - | +++ Clean complete | + | +++ Clean complete |
| - | +++ Assembling [startup_stm32f0xx.S] | + | +++ Assembling [startup_stm32g071xx.s] |
| - | +++ Compiling [boot.c] | + | +++ Compiling [main.c] |
| - | +++ Compiling [main.c] | + | +++ Compiling [boot.c] |
| ... | ... | ||
| - | +++ Linking [demoprog_stm32f091.elf] | + | +++ Linking [demoprog_stm32g071.elf] |
| ... | ... | ||
| - | +++ Build complete [demoprog_stm32f091.srec] | + | +++ Build complete [demoprog_stm32g071.srec] |
| </code> | </code> | ||
| The output file is | The output file is | ||
| - | * \Target\Demo\ARMCM0_STM32F0_Nucleo_F091RC_GCC\**Prog**\bin\**demoprog_stm32f091.srec** | + | * \Target\Demo\ARMCM0_STM32G0_Nucleo_G071RB_GCC\**Prog**\bin\**demoprog_stm32g071.srec** |
| ===== Firmware update procedure ===== | ===== Firmware update procedure ===== | ||
| - | To download the demo program \Target\Demo\ARMCM0_STM32F0_Nucleo_F091RC_GCC\**Prog**\bin\**demoprog_stm32f091.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use: | + | To download the demo program \Target\Demo\ARMCM0_STM32G0_Nucleo_G071RB_GCC\**Prog**\bin\**demoprog_stm32g071.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use: |
| + | |||
| + | * [[manual:rs232_demo|Firmware updates using the RS232 communication interface]] | ||
| - | * [[manual:uart_demo|Firmware updates using the UART communication interface]] | ||
| - | * [[manual:can_demo|Firmware updates using the CAN communication interface]] | ||
manual/demos/nucleo_g071rb_gcc.1565702845.txt.gz · Last modified: 2019/09/24 22:13 (external edit)
Page Tools
