Differences

This shows you the differences between two versions of the page.

Link to this comparison view

manual:demos:nucleo_g071rb_gcc [2019/08/13 15:29]
voorburg [Building the Demo Program]
manual:demos:nucleo_g071rb_gcc [2019/08/13 15:30] (current)
voorburg [Firmware update procedure]
Line 82: Line 82:
 ===== Firmware update procedure ===== ===== Firmware update procedure =====
  
-To download the demo program \Target\Demo\ARMCM0_STM32F0_Nucleo_F091RC_GCC\**Prog**\bin\**demoprog_stm32f091.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:+To download the demo program \Target\Demo\ARMCM0_STM32G0_Nucleo_G071RB_GCC\**Prog**\bin\**demoprog_stm32g071.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:
  
   * [[manual:uart_demo|Firmware updates using the UART communication interface]]   * [[manual:uart_demo|Firmware updates using the UART communication interface]]
-  * [[manual:can_demo|Firmware updates using the CAN communication interface]]+
  
  
manual/demos/nucleo_g071rb_gcc.txt · Last modified: 2019/08/13 15:30 by voorburg
 
Powered by PHP Driven by DokuWiki