User Tools

Site Tools


manual:demos:nucleo_g071rb_gcc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
manual:demos:nucleo_g071rb_gcc [2019/08/13 15:29]
voorburg [Building the Demo Program]
manual:demos:nucleo_g071rb_gcc [2019/09/24 22:12] (current)
Line 82: Line 82:
 ===== Firmware update procedure ===== ===== Firmware update procedure =====
  
-To download the demo program \Target\Demo\ARMCM0_STM32F0_Nucleo_F091RC_GCC\**Prog**\bin\**demoprog_stm32f091.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:+To download the demo program \Target\Demo\ARMCM0_STM32G0_Nucleo_G071RB_GCC\**Prog**\bin\**demoprog_stm32g071.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:
  
   * [[manual:​uart_demo|Firmware updates using the UART communication interface]]   * [[manual:​uart_demo|Firmware updates using the UART communication interface]]
-  * [[manual:​can_demo|Firmware updates using the CAN communication interface]]+
  
  
manual/demos/nucleo_g071rb_gcc.txt ยท Last modified: 2019/09/24 22:12 (external edit)