User Tools

Site Tools


manual:demos:nucleo_g071rb_truestudio

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
manual:demos:nucleo_g071rb_truestudio [2019/08/13 11:58]
voorburg [Building and programming the Bootloader]
manual:demos:nucleo_g071rb_truestudio [2019/09/24 22:12]
127.0.0.1 external edit
Line 50: Line 50:
 The output file is The output file is
  
-  * \Target\Demo\ARMCM0_STM32F0_Nucleo_F091RC_TrueStudio\**Prog**\Debug\**demoprog_stm32f091.srec**+  * \Target\Demo\ARMCM0_STM32G0_Nucleo_G071RB_TrueStudio\**Prog**\Debug\**demoprog_stm32g071.srec**
  
 ===== Firmware update procedure ===== ===== Firmware update procedure =====
  
-To download the demo program \Target\Demo\ARMCM0_STM32F0_Nucleo_F091RC_TrueStudio\**Prog**\Debug\**demoprog_stm32f091.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:+To download the demo program \Target\Demo\ARMCM0_STM32G0_Nucleo_G071RB_TrueStudio\**Prog**\Debug\**demoprog_stm32g071.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:
  
   * [[manual:​uart_demo|Firmware updates using the UART communication interface]]   * [[manual:​uart_demo|Firmware updates using the UART communication interface]]
-  * [[manual:​can_demo|Firmware updates using the CAN communication interface]]+
  
  
manual/demos/nucleo_g071rb_truestudio.txt ยท Last modified: 2020/02/06 16:37 by voorburg