User Tools

Site Tools


manual:demos:olimex_stm32p207_iar

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
manual:demos:olimex_stm32p207_iar [2018/01/03 15:00]
voorburg created
manual:demos:olimex_stm32p207_iar [2019/09/24 22:12] (current)
Line 20: Line 20:
 ===== Building and programming the Bootloader ===== ===== Building and programming the Bootloader =====
  
-Before the bootloader can be used, it needs to be built and programmed into the STM32F107's internal flash memory. The steps in this section only need to be done once.+Before the bootloader can be used, it needs to be built and programmed into the STM32F207's internal flash memory. The steps in this section only need to be done once.
  
 When using IAR EWARM, simply open the workspace from within the Embedded Workbench. The workspace file (stm32f207.eww) is located at: \Target\Demo\ARMCM3_STM32F2_Olimex_STM32P207_IAR\**Boot**\ide\. Once opened, select Project->​Rebuild All from the menu to compile all the bootloader sources and link the together into the final executable. When using IAR EWARM, simply open the workspace from within the Embedded Workbench. The workspace file (stm32f207.eww) is located at: \Target\Demo\ARMCM3_STM32F2_Olimex_STM32P207_IAR\**Boot**\ide\. Once opened, select Project->​Rebuild All from the menu to compile all the bootloader sources and link the together into the final executable.
manual/demos/olimex_stm32p207_iar.txt ยท Last modified: 2019/09/24 22:12 (external edit)