manual:demos:olimex_stm32p405_gcc
Differences
This shows you the differences between two versions of the page.
| Next revision Both sides next revision | |||
|
manual:demos:olimex_stm32p405_gcc [2016/10/27 15:54] voorburg created |
manual:demos:olimex_stm32p405_gcc [2017/07/18 11:10] voorburg [Development Environment] |
||
|---|---|---|---|
| Line 14: | Line 14: | ||
| To program the bootloader into the internal flash on the STM32F405 microcontroller, the [[http://www.segger.com/development-tools.html|Segger J-Link]] JTAG interface was used. However, this is not required if you have another means of programming the internal flash. | To program the bootloader into the internal flash on the STM32F405 microcontroller, the [[http://www.segger.com/development-tools.html|Segger J-Link]] JTAG interface was used. However, this is not required if you have another means of programming the internal flash. | ||
| - | To compile the demo programs you can use the [[http://www.emblocks.org/|EmBitz]] development environment from Em::Blocks. The version that was used to create these demo programs was {{:manual:embitz_1_00.zip?linkonly|EmBitz version 1.00}}. | + | To build the demo programs you can use the [[https://developer.arm.com/open-source/gnu-toolchain/gnu-rm|GNU ARM Embedded]] toolchain. |
| ===== Building and programming the Bootloader ===== | ===== Building and programming the Bootloader ===== | ||
manual/demos/olimex_stm32p405_gcc.txt · Last modified: 2023/12/04 22:28 by voorburg
Page Tools
