Differences

This shows you the differences between two versions of the page.

--- manual:demos:olimex_stm32p405_truestudio [2017/07/17 17:10]
voorburg [Supported firmware update interfaces]
+++ manual:demos:olimex_stm32p405_truestudio [2019/09/24 22:12]
127.0.0.1 external edit
@@ Line 12: / Line 12: @@
 This demo is targeted towards the [[https://www.olimex.com/Products/ARM/ST/STM32-P405/|Olimex STM32-P405]] board, with 1024 kB internal Flash EEPROM and 192 kB internal RAM.
-To compile the demo programs you can use the [[https://atollic.com/truestudio/|Atollic TrueStudio]] development environment. The freely available Lite-edition suffices. Note the Atollic TrueStudio is cross-platform. The information outlined on this page applies to both Microsoft Windows and Linux users.
+To compile the demo programs you can use the [[https://atollic.com/truestudio/|Atollic TrueStudio]] development environment. Note the Atollic TrueStudio is cross-platform. The information outlined on this page applies to both Microsoft Windows and Linux users.
 To program the bootloader into the internal flash on the STM32F405 microcontroller, the [[http://www.segger.com/development-tools.html|Segger J-Link]] JTAG interface was used. However, this is not required if you have another means of programming the internal flash.

OpenBLT Bootloader