User Tools

Site Tools


manual:demos:olimex_stm32p405_truestudio

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
manual:demos:olimex_stm32p405_truestudio [2017/07/17 17:10]
voorburg [Supported firmware update interfaces]
manual:demos:olimex_stm32p405_truestudio [2019/09/24 22:12] (current)
Line 12: Line 12:
 This demo is targeted towards the [[https://​www.olimex.com/​Products/​ARM/​ST/​STM32-P405/​|Olimex STM32-P405]] board, with 1024 kB internal Flash EEPROM and 192 kB internal RAM. This demo is targeted towards the [[https://​www.olimex.com/​Products/​ARM/​ST/​STM32-P405/​|Olimex STM32-P405]] board, with 1024 kB internal Flash EEPROM and 192 kB internal RAM.
  
-To compile the demo programs you can use the [[https://​atollic.com/​truestudio/​|Atollic TrueStudio]] development environment. The freely available Lite-edition suffices. Note the Atollic TrueStudio is cross-platform. The information outlined on this page applies to both Microsoft Windows and Linux users.+To compile the demo programs you can use the [[https://​atollic.com/​truestudio/​|Atollic TrueStudio]] development environment. Note the Atollic TrueStudio is cross-platform. The information outlined on this page applies to both Microsoft Windows and Linux users.
  
 To program the bootloader into the internal flash on the STM32F405 microcontroller,​ the [[http://​www.segger.com/​development-tools.html|Segger J-Link]] JTAG interface was used. However, this is not required if you have another means of programming the internal flash. To program the bootloader into the internal flash on the STM32F405 microcontroller,​ the [[http://​www.segger.com/​development-tools.html|Segger J-Link]] JTAG interface was used. However, this is not required if you have another means of programming the internal flash.
manual/demos/olimex_stm32p405_truestudio.txt ยท Last modified: 2019/09/24 22:12 (external edit)