User Tools

Site Tools


manual:demos:olimexino_stm32_truestudio

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
manual:demos:olimexino_stm32_truestudio [2018/06/07 12:16]
voorburg [Building the Demo Program]
manual:demos:olimexino_stm32_truestudio [2020/02/06 16:26] (current)
voorburg
Line 3: Line 3:
 ===== Supported firmware update interfaces ===== ===== Supported firmware update interfaces =====
  
-UART           ^ CAN             ^ USB          ^ TCP/​IP ​      ^ SD-card ​     ^+RS232          ​^ CAN             ^ USB          ^ TCP/​IP ​      ^ SD-card ​     ^
 | No             | Yes             | Yes          | No           | Yes          | | No             | Yes             | Yes          | No           | Yes          |
  
Line 53: Line 53:
 ===== Firmware update procedure ===== ===== Firmware update procedure =====
  
-To download the demo program \Target\Demo\ARMCM3_STM32F1_Olimexino_STM32_GCC\**Prog**\bin\**demoprog_olimexino_stm32.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:+To download the demo program \Target\Demo\ARMCM3_STM32F1_Olimexino_STM32_TrueStudio\**Prog**\Debug\**demoprog_olimexino_stm32.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:
  
   * [[manual:​can_demo|Firmware updates using the CAN communication interface]]   * [[manual:​can_demo|Firmware updates using the CAN communication interface]]
manual/demos/olimexino_stm32_truestudio.1528366606.txt.gz ยท Last modified: 2019/09/24 22:13 (external edit)