User Tools

Site Tools


manual:demos:stm32f0_discovery_gcc

This is an old revision of the document!


ARM-CM0 STM32 STMicroelectronics STM32F0-Discovery GCC

Supported firmware update interfaces

UART CAN USB TCP/IP SD-card
Yes No No No No

Development Environment

This demo is targeted towards the STM32F0-Discovery board, with 64 kB internal Flash EEPROM and 8 kB internal RAM.

To program the bootloader into the internal flash on the STM32F051 microcontroller, the on-board ST-Link Debugger Interface was used. However, this is not required if you have another means of programming the internal flash.

To compile the demo programs you can use the Em::Blocks development environment. The version that was used to create these demo programs was EmBitz version 0.42.

The Olimex USB-Serial-Cable-F was used to create a connection between the STM32F051 USART2 serial peripheral and the PC's COM-port.

manual/demos/stm32f0_discovery_gcc.1461942909.txt.gz · Last modified: 2019/09/24 22:13 (external edit)