Navigation
External Links
Donate
Show your appreciation for OpenBLT
and support future development by
donating.
External Links
Donate
Show your appreciation for OpenBLT
and support future development by
donating.
This is an old revision of the document!
UART | CAN | USB | TCP/IP | SD-card |
---|---|---|---|---|
Yes | No | No | No | No |
This demo is targeted towards the STM32F0-Discovery board, with 64 kB internal Flash EEPROM and 8 kB internal RAM.
To program the bootloader into the internal flash on the STM32F051 microcontroller, the on-board ST-Link Debugger Interface was used. However, this is not required if you have another means of programming the internal flash.
To compile the demo programs you can use the Em::Blocks development environment. The version that was used to create these demo programs was EmBitz version 0.42.
The Olimex USB-Serial-Cable-F was used to create a connection between the STM32F051 USART2 serial peripheral and the PC's COM-port. The pin connections are as follows: