User Tools

Site Tools


manual:demos:stm32f3_discovery_gcc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
manual:demos:stm32f3_discovery_gcc [2018/06/11 15:43]
voorburg [Building the Demo Program]
manual:demos:stm32f3_discovery_gcc [2019/09/24 22:12] (current)
Line 83: Line 83:
 ===== Firmware update procedure ===== ===== Firmware update procedure =====
  
-To download the demo program \Target\Demo\ARMCM4_STM32F3_Discovery_F303VC_TrueStudio\**Prog**\Debug\**demoprog_stm32f303.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:+To download the demo program \Target\Demo\ARMCM4_STM32F3_Discovery_F303VC_GCC\**Prog**\bin\**demoprog_stm32f303.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:
  
   * [[manual:​usb_demo|Firmware updates using the USB communication interface]]   * [[manual:​usb_demo|Firmware updates using the USB communication interface]]
  
 For firmware updates via USB, keep in mind that the USB cable should be connected to the USB USER connector on the board and not the USB ST-LINK connector. For firmware updates via USB, keep in mind that the USB cable should be connected to the USB USER connector on the board and not the USB ST-LINK connector.
manual/demos/stm32f3_discovery_gcc.txt ยท Last modified: 2019/09/24 22:12 (external edit)