manual:demos:stm32f3_discovery_truestudio
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Last revision Both sides next revision | ||
|
manual:demos:stm32f3_discovery_truestudio [2018/06/11 15:02] voorburg [Building the Demo Program] |
manual:demos:stm32f3_discovery_truestudio [2019/09/24 22:12] 127.0.0.1 external edit |
||
|---|---|---|---|
| Line 53: | Line 53: | ||
| ===== Firmware update procedure ===== | ===== Firmware update procedure ===== | ||
| - | To download the demo program \Target\Demo\ARMCM4_STM32F3_Nucleo_F303K8_TrueStudio\**Prog**\Debug\**demoprog_stm32f303.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use: | + | To download the demo program \Target\Demo\ARMCM4_STM32F3_Discovery_F303VC_TrueStudio\**Prog**\Debug\**demoprog_stm32f303.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use: |
| - | + | ||
| - | * [[manual:uart_demo|Firmware updates using the UART communication interface]] | + | |
| - | * [[manual:can_demo|Firmware updates using the CAN communication interface]] | + | |
| + | * [[manual:usb_demo|Firmware updates using the USB communication interface]] | ||
| + | For firmware updates via USB, keep in mind that the USB cable should be connected to the USB USER connector on the board and not the USB ST-LINK connector. | ||
manual/demos/stm32f3_discovery_truestudio.txt · Last modified: 2020/02/06 16:29 by voorburg
Page Tools
