User Tools

Site Tools


manual:demos:stm32f3_discovery_truestudio

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
manual:demos:stm32f3_discovery_truestudio [2018/06/11 15:02]
voorburg [Building the Demo Program]
manual:demos:stm32f3_discovery_truestudio [2019/09/24 22:12] (current)
Line 53: Line 53:
 ===== Firmware update procedure ===== ===== Firmware update procedure =====
  
-To download the demo program \Target\Demo\ARMCM4_STM32F3_Nucleo_F303K8_TrueStudio\**Prog**\Debug\**demoprog_stm32f303.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use: +To download the demo program \Target\Demo\ARMCM4_STM32F3_Discovery_F303VC_TrueStudio\**Prog**\Debug\**demoprog_stm32f303.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use:
- +
-  * [[manual:​uart_demo|Firmware updates using the UART communication interface]] +
-  * [[manual:​can_demo|Firmware updates using the CAN communication interface]]+
  
 +  * [[manual:​usb_demo|Firmware updates using the USB communication interface]]
  
 +For firmware updates via USB, keep in mind that the USB cable should be connected to the USB USER connector on the board and not the USB ST-LINK connector.
manual/demos/stm32f3_discovery_truestudio.txt · Last modified: 2019/09/24 22:12 (external edit)