manual:demos:tc375_lite_kit_ads
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Last revision Both sides next revision | ||
|
manual:demos:tc375_lite_kit_ads [2022/11/07 18:29] voorburg [Building and programming the Bootloader] |
manual:demos:tc375_lite_kit_ads [2022/11/07 18:32] voorburg [Development Environment] |
||
|---|---|---|---|
| Line 13: | Line 13: | ||
| - | To compile the demo programs you can use the [[https://www.infineon.com/cms/en/product/promopages/aurix-development-studio/|AURIX Development Studio]] | + | To compile the demo programs you can use the [[https://www.infineon.com/cms/en/product/promopages/aurix-development-studio/|AURIX Development Studio]]. |
| To program the bootloader into the internal flash, the on-board miniWiggler interface was used. Firmware updates via the serial communication port are preconfigured to use the virtual COM-port offered by the miniWiggler. This means that no additional hardware is needed, besides a standard micro-USB cable. | To program the bootloader into the internal flash, the on-board miniWiggler interface was used. Firmware updates via the serial communication port are preconfigured to use the virtual COM-port offered by the miniWiggler. This means that no additional hardware is needed, besides a standard micro-USB cable. | ||
| Line 46: | Line 46: | ||
| ===== Building the Demo Program ===== | ===== Building the Demo Program ===== | ||
| - | - Set the project as the active project in Eclipse. This is achieved by clicking the **Prog** project in the //Project Explorer// to select it. | + | Set the project as the active project in Eclipse. This is achieved by right-clicking the **Prog** project in the project navigator called //C/C++ Projects//. From the context menu, select //Set Active Project//. Next, select //Project → Rebuild Active Project// from the menu to compile all the user program sources and link them together into the final executable. |
| - | - Next, right-click the **Prog** project in the //Project Explorer// and select //Refresh// from the popup menu. | + | |
| - | - Finally, right-click the **Prog** project in the //Project Explorer// and select //Build Project// from the popup menu to compile all the user program sources and link them together into the final executable. | + | |
| The output file is | The output file is | ||
| - | * \Target\Demo\ARMCM7_STM32F7_Nucleo_F767ZI_CubeIDE\**Prog**\Debug\**demoprog_stm32f767.srec** | + | * \Target\Demo\TRICORE_TC3_TC375_Lite_Kit_ADS\**Prog**\Debug\**demoprog_tc375.srec** |
| ===== Firmware update procedure ===== | ===== Firmware update procedure ===== | ||
| - | To download the demo program \Target\Demo\ARMCM7_STM32F7_Nucleo_F767ZI_CubeIDE\**Prog**\Debug\**demoprog_stm32f767.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use: | + | To download the demo program \Target\Demo\TRICORE_TC3_TC375_Lite_Kit_ADS\**Prog**\Debug\**demoprog_tc375.srec** using the bootloader, follow the instructions in the following links, depending on the communication interface you intend to use: |
| * [[manual:rs232_demo|Firmware updates using the RS232 communication interface]] | * [[manual:rs232_demo|Firmware updates using the RS232 communication interface]] | ||
| - | * [[manual:net_demo|Firmware updates using the TCP/IP communication interface]] | + | * [[manual:can_demo|Firmware updates using the CAN communication interface]] |
manual/demos/tc375_lite_kit_ads.txt · Last modified: 2023/12/04 22:41 by voorburg
Page Tools
