Differences

This shows you the differences between two versions of the page.

--- manual:demos:usb_driver_install [2019/09/24 22:12]
127.0.0.1 external edit
+++ manual:demos:usb_driver_install [2020/01/16 11:03]
voorburg
@@ Line 7: / Line 7: @@
 Before installing the USB driver, make sure the USB device that runs the OpenBLT USB bootloader is not connected to your PC. If a prior version of the USB driver was installed, it is recommended to first uninstall this driver.
-The installation of the USB driver is performed using the Zadig tool. You can download the necessary files here: {{:manual:openblt_usb_driver.zip?linkonly|OpenBLT USB Driver Package}}. After downloading the OpenBLT USB Driver Package, unzip the archive to c:\openblt_usb_driver\ and start the program **zadig_2.2.exe**.
+The installation of the USB driver is performed using the Zadig tool. You can download the necessary files here: {{:manual:openblt_usb_driver.zip?linkonly|OpenBLT USB Driver Package}}. After downloading the OpenBLT USB Driver Package, unzip the archive to c:\openblt_usb_driver\ and start the program **zadig_2.2.exe**. Note that users reported issues with the USB driver, if they used a different directory to unzip to, so make sure to use the c:\openblt_usb_driver\ directory.
 From the program menu, select **Device -> Load Preset Device** and select the file **openblt.cfg**, which is found in the same directory as where **zadig_2.2.exe** is located. Next, click the **Install Driver** button to install the USB driver for the OpenBLT bootloader:

OpenBLT Bootloader